The Fire Patrol is a 2” Baffle filter. Made in Aluminum “A”, Galvanized Steel “G”, 430 Stainless Steel – 430 “S” and 304 Stainless Steel – 304 “S”. All four are 1 7/8” thick, and are classified by UL (approved for Grease) NFPA std. 96. Each “pad” is surrounded with a heavy frame, secured at one corner with rivets. Designed to go in grease hoods and fryer units to prevent grease and flames from getting up into the exhaust duct work. When ordering, state vertical dimension first to insure proper installation. Available in stock and special sizes.
Fire Guard “G”
The Fire Guard “G” is a heavy Galvanized Steel grease filter. Manufactured with heavy 24 gauge Galvanized Steel, allowing for extra strength and rigidity in the range hood. The extra weight helps with vibration when inside the hood. The pad is enclosed in a heavy galvanized Steel frame, secured at one corner with rivets. Designed with the “Hood Cleaning” service in mind, these filters are made to hold up through the toughest conditions. Available in both stock and special sizes. When ordering, state vertical dimension first to assure proper installation.
The Fire RB – 1 grease filter is a 1 ¾” baffle filter. Made in Aluminum “A” and Galvanized Steel “G”, these filters trap the grease, preventing fire from getting into the exhaust duct work. These filters are designed to withstand rigorous commercial kitchen use while providing the ultimate in fire protection. When ordering, state vertical dimension first to insure proper installation. Available in only stock sizes.
Thrifty Flame Stop
The Thrifty Flame Stop in a 1” Baffle Filter. Available in both Galvanized Steel “G” and 430 Stainless Steel “S”, this baffle filter is designed to be used in grease hoods that accommodate a one inch baffle filter. The two layers of vertical baffles are designed to drain grease into the collecting trough below as well as eliminate flame penetration into the exhaust ducts. Available in both stock and special sizes.