Throwaway Media

Fiberglass and Polyester

FIBERGLASS MEDIA

Pads: All sizes and shapes available

Full Rolls: 85' and 200' in all widths (up to 60" wide)

Service Rolls: All rolls 20' long, in widths of 24" , 30" , and 36"

Smith FIBERGLASS MEDIA is made of 100% continuous filaments of spun glass, bonded with a thermosetting resin. The media assures deep dirt penetration and high dirt holding capacity because the filaments are electronically programmed to form effective high loft, gradient density patterns.

This filter media is evenly coated with an adhesive, which has a pseudo plastic nature which prevents migration into the air ducts. A sturdy laminated backing on the downstream side reinforces the blue laminated glass media for greater strength. The backing also adds a final filter polish and provides the high tensile strength needed to prevent necking under tension in mechanical rolls.

Flash point for the FIBERGLASS MEDIA is 450 degrees F. minimum on coated media and meets or exceeds all individual standards. All media is tested under ASHRAE 52 standards, with individual laboratory test available to qualified buyers on request. The filter media is listed at Class II by U.L.

POLYESTER MEDIA

The Smith POLYESTER MEDIA is comprised of high loft balls of polyester fibers bonded together with a fire retardant, heat sealable resin to form a highly uniform, resilient , yet soft blanket of air filter media. The advantages to the polyester media are increased efficiency, no downstream unloading , no leakage or bypass, no fiber break off and no migration into the system. Graduated density of this media lends itself to greater depth loading. UL Class 2.

The POLYESTER MEDIA is suitable for use in temperatures up to 200 degrees F. Polyester media is the perfect solution for replacing throwaway fiberglass filters and media.

IR=Initial resistance at 300 FPM F

FR=Final resistance

ASA=Average synthetic Arrestance

ADHC=Average Dust holding capacity